产品展厅
产品展厅
TPC-ET G4074 挑战是耐用性和刚度
Hytrel G4074 物性表
| 基本信息 | |
|---|---|
| 黄卡编号 |
|
| 添加剂 |
|
| 特性 |
|
| 用途 |
|
| 机构评级 |
|
| 形式 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 1.18 | g/cm3 | ISO 1183 |
| 熔流率（熔体流动速率） (190°C/2.16 kg) | 5.3 | g/10 min | ISO 1133 |
| 溶化体积流率（MVR） (190°C/2.16 kg) | 5.00 | cm3/10min | ISO 1133 |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 肖氏硬度 | ISO 868 | ||
| 邵氏 D | 40 | ISO 868 | |
| 邵氏 D, 15 秒 | 35 | ISO 868 |
杜邦新技术TPEE有助于满足汽车行业中对新一代性能的需求：
1.减轻重量
2.更好的耐化学性
3.改进了功能集成
4.可再生能源聚合物
5.软管和管件应用
6.耐受更高温度的解决方案
7.成本更低的系统解决方案
Hytrel® 5556 | TPC | 55 Shore D High Performance Polyester Elastomer | |
Hytrel® 60LW | TPC-X | Polyester Elastomer Concentrate Developed for Enhancing Abrasion and Wear Resistance | |
Hytrel® 6356 | TPC | 63 Shore D High Performance Polyester Elastomer | |
Hytrel® HTR6108 | TPC | 61 Shore D High Performance Polyester Elastomer with Low Permeability to Fuels and Oils | |
Hytrel® HTR6347G10 NC010 | TPC-GF | 63 Shore D, Glass Reinforced, High Performance Polyester Elastomer | |
Hytrel® HTR8068 | TPC FR(17) | 44 Shore D, Flame Retardant, Polyester Elastomer Developed for Extrusion and Injection Moulding | |
Hytrel® HTR8136BK | TPC | 49 Shore D, Heat Stabilised, High Viscosity Polyester Elastomer Developed for Blow moulding | |
Hytrel® HTR8139BK | TPC | 44 Shore D, Lubricated, High Viscosity Polyester Elastomer Developed for Blow Molding | |
Hytrel® HTR8163HVBK | TPC | 65 Shore D Polyester Elastomer with Heat Ageing Protection Developed for Extrusion | |
Hytrel® HTR8206 | TPC | High Performance Polyester Elastomer with High Moisture Vapor Transmission Rate Developed for Extrusion and Injection moulding | |
Hytrel® HTR8223 BK320 | TPC | 42 Shore D High Viscosity Polyester Elastomer Developed for Blow Molding | |
Hytrel® HTR8241 | TPC | 65 Shore D High Performance Polyester Elastomer Developed for Extrusion | |
Hytrel® HTR8341C BK320 | TPC | 40 Shore D, Lubricated, High Viscosity Polyester Elastomer with Superior Fatigue Resistance Developed for Blow Molding | |
Hytrel® HTR8341G BK320 | TPC | 40 Shore D, Slightly Lubricated, High Viscosity Polyester Elastomer with Superior Fatigue Resistance Developed for Blow Molding |
